5
89
Sharing
This camera has a built-in Wi-Fi function. By directly connecting
to a communication device such as a smartphone or tablet via
wireless LAN, the camera can be operated from the
communication device and images can be shared with others
via social networks or e-mail.
The Wi-Fi function is disabled at the time of turning the camera
on. Enable the function using one of the following methods.
• Setting from the menus (p.89)
• Pressing the self-portrait shutter button (p.90)
• Touching a communication device (p.90)
t
Memo
• When the Wi-Fi function is enabled, the
k
(white) icon
indicating the wireless LAN status is displayed on the status
screen and Live View screen. When
l
(gray) is displayed,
a connection with the access point was not made correctly.
• Even after the Wi-Fi function is enabled, it is disabled again
when the camera is turned off and on again. Also, when the
camera enters
C
mode, the Wi-Fi function is disabled.
• Auto Power Off is not available while a Wi-Fi connection is
established or images are being transferred. If Auto Power
Off is activated while a connection is not established or during
standby, the Wi-Fi function is disabled. The function is
enabled when the camera recovers from Auto Power Off.
• The Wi-Fi function is disabled during the USB connection.
u
Caution
• Do not attempt to use the Wi-Fi function in a location where
the use of wireless LAN devices is restricted or prohibited,
such as on airplanes.
• When using the Wi-Fi function, please observe local laws and
regulations governing radio communication.
• If a memory card with a built-in wireless LAN function
(such as an Eye-Fi card or a Flucard) is used, radio wave
interference may occur. When this occurs, disable the Wi-Fi
function of the camera.
1
Select [Wi-Fi] in
D
3 menu and press
D
.
The [Wi-Fi] screen appears.
2
Set [Action Mode] to [ON].
Select [OFF] to disable the Wi-Fi
function.
3
Press
F
twice.
t
Memo
• In Step 2, select [Communication Info] to check the SSID,
Password, and MAC Address of the wireless LAN. Or, select
[Reset Transfer Settings] to reset the settings to their default
values.
Enabling the Wi-Fi Function
Setting from the Menus
D
3
Wi-Fi
Wi-Fi
Action Mode
Action Mode
Communication Info
Communication Info
Reset Transfer Settings
Reset Transfer Settings
Cancel
Cancel
OK
OK
KS2_OPM_EN.book Page 89 Friday, February 20, 2015 12:10 PM