5
90
Sharing
1
Press and hold the self-
portrait shutter button.
A beep sounds and [Wi-Fi
enabled] appears on the screen.
2
Release the self-portrait shutter button.
To disable the Wi-Fi function, press and hold the self-
portrait shutter button again.
u
Caution
• When the self-portrait shutter button lamp is lit green or red,
it functions as the shutter release button. In such cases,
use another method to turn the Wi-Fi function on or off.
When this camera comes into contact with a communication
device equipped with the NFC function, the camera establishes
1
Lightly touch the
communication device to the
NFC mark of the camera.
A beep sounds and [Wi-Fi
enabled] appears on the screen.
u
Caution
• To establish a Wi-Fi connection by touching a communication
device, the Wi-Fi function and the NFC reader/writer function
of the device must be enabled in advance. For details on how
to operate the communication device, refer to the operating
manual of the device.
t
Memo
• When the dedicated application “Image Sync” is installed on
the communication device, the Wi-Fi function is enabled and
Image Sync is started at the same time by touch operation.
(p.94) When Image Sync is not installed, the download site for
the application is displayed on the communication device.
Pressing the Self-portrait Shutter Button
Touching a Communication Device
KS2_OPM_EN.book Page 90 Friday, February 20, 2015 12:10 PM