○
○
○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Pull the second paper tray (Tray 2) up until it stops. After
that, lift it slightly, then pull it out.
TAPH210E
Pull out the first paper tray (Tray 1), and take the
screwdriver (
a
) from the tray.
Note
❒
Be sure to return the screwdriver to the paper tray after using
it.
Lock the paper bank and the printer with the screw.
Replace the second paper tray (Tray 2) into the printer.
TAPH221E
Open the lower vertical paper feed cover on the right side
of the paper bank (
a
). Hang the lock plate hook in the
hole inside (
b
), and then fasten the plate with the knob
screw using your fingers.
TAPP050E
Close the lower vertical paper feed cover.
Open the connector cover (
a
), remove the tape that
holds the connector cable and attach the connector
cables (
b
) as shown in the illustration.
Close the connector cover.
Note
❒
Print a configuration page to confirm that the paper bank is
properly installed. For instructions on how to print a
configuration page, see “Printing a Configuration Page” in the
“Printer Reference” on the CD-ROM labeled “Operating
Instructions” that comes with the printer .