36
In Self-timer mode, a picture is taken ten seconds or two seconds after the shutter
release button is pressed.
Stabilize the camera with a tripod or other support when taking a picture with the
self-timer.
1
Press the four-way controller (
2
) in
A
mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (
45
) to select
g
and press the
four-way controller (
3
).
3
Use the four-way controller (
45
)
to select
g
or
Z
and press the
4
button.
The camera is ready to take a picture using
the self-timer.
When the camera detects a person’s face,
the Face Detection function is activated
and the face detection frame appears.
• In shooting modes other than
R
(Program),
A
(Night Scene),
C
(Movie),
(Digital Microscope),
(Handheld Night Snap),
(Interval Shot),
(Interval Movie),
(High Speed Movie), and
c
(Digital SR),
Saturation, Contrast, Sharpness, White Balance, etc. are automatically set
to the optimal settings for the selected mode.
• In
(Digital Microscope) mode, Recorded Pixels can be selected from
12M(16:9), 5M(16:9), 4M(16:9) or 2M(16:9). The maximum magnification
varies depending on the Recorded Pixels.
• Some functions may not be available or may not function fully depending
on the selected shooting mode.
• The shutter speed tends to be slower when taking pictures of dark scenes.
To prevent camera shake, set the Pixel Track SR to
O
(On), or put the
camera on a tripod and use the self-timer (p.36) or a remote control unit.
Using the Self-timer
g
Use this mode when you want to be included in a group picture. The picture
is taken approximately ten seconds after the shutter release button is pressed.
Z
Use this mode to avoid camera shake. The picture is taken approximately two
seconds after the shutter release button is pressed.
MENU
MENU
OK
OK
MENU
OK
Drive Mode
Drive Mode
Self-timer
Self-timer
Drive Mode
Self-timer
Cancel
Cancel
Cancel
OK
OK
OK
Summary of Contents for R06020
Page 62: ...Memo ...
