4
• When the camera has not been used for a long time, confirm that it is still working properly, particularly
prior to taking important pictures (such as at a wedding or when traveling). Contents of the recording
cannot be guaranteed if recording, playback or transferring your data to a computer, etc. is not
possible due to a malfunction of your camera or recording media (SD Memory Card), etc.
• The lens on this camera is not interchangeable. The lens is not removable.
• To keep the battery in optimum condition, avoid storing it in a fully charged state or in high
temperatures.
• If the battery is left inserted and the camera is not used for a long time, the battery will over-
discharge and shorten the battery’s life.
• Charging the battery a day before use or on the day of use is recommended.
•
Class II equipment: The provided USB power adapter is a Class II (double-insulated) product.
• Hot and humid places should be avoided. Particular care should be taken regarding vehicles, which
can become very hot inside.
• Ensure that the camera is not subjected to substantial vibrations, shocks, or pressure as this may
cause damage, malfunction, or a loss in waterproof performance. Place the camera on a cushion
for protection when the camera is subjected to the vibrations of a motorbike, car, ship, etc. If the
camera is subjected to substantial vibrations, shocks, or pressure, take your camera to your
nearest service center and have it checked.
• The temperature range in which the camera can be used is -10°C to 40°C (14°F to 104°F).
• The display will become black at high temperatures but will return to normal at normal
temperatures.
• The response speed of the display becomes slow at low temperatures. This is due to the
properties of the liquid crystal and is not a malfunction.
• If the camera is subjected to rapid temperature changes, condensation may form on the inside and
outside of the camera. Therefore put the camera in a bag or plastic bag and take it out when the
difference in temperature has subsided.
• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salt. These could cause the
camera to breakdown. Wipe the camera to dry off any rain or water drops.
• Do not press the display with excessive force. This could cause it to break or malfunction.
• Be careful not to sit down with the camera in your back pocket as this may damage the exterior of
the camera or the display.
• When using a tripod with the camera, be careful not to overtighten the screw in the tripod socket
on the camera.
• Do not clean the camera with organic solvents such as thinner, alcohol or benzine.
• Use a lens brush to remove dust accumulated on the lens. Never use a spray blower for cleaning
as it may damage the lens.
Care to be Taken During Handling
Before Using Your Camera
About the Battery and USB Power Adapter
Precautions on Carrying and Using Your Camera
Cleaning Your Camera
Summary of Contents for R06020
Page 62: ...Memo ...
