54
Changing Flash Modes
This section explains how to change the flash mode. Switch the flash mode to meet
your photographic needs.
■
Flash Modes
The mode screen will change in the following sequence as you switch the flash mode:
* The factory default setting is flash off mode.
●
Flash off mode
The flash will not fire, even in dark places. Use this mode in places where flash
photography is prohibited and in bright indoor settings.
●
Auto Flash mode
The flash will fire automatically in dark places and where there is backlighting.
●
Forced Flash mode
Backlighting and strong light can produce dark shadows in photographs of the faces of
subjects. Use this mode in such situations. The flash will always fire, regardless of the
brightness.
●
Slow synchro mode
The flash can be fired to illuminate the subject while a slow shutter speed correctly
exposes the background. Use at indoor parties, etc., to clearly photograph the subjects
while avoiding a dark background.
Effective Range of the Flash
When you shoot with the flash activated, the flash has an effective range of
about 0.4 to 3.0 m (1.3 ft to 9.9 ft) for the telephoto setting and 0.4 to 3.4 m (1.3
ft to 11.2 ft) for the wide-angle setting. The subject will appear dark in the picture
if the light from the flash fails to reach it.
Flash Off Mode
Auto Flash Mode
Forced Flash Mode
Slow Synchro Mode
1 2
1 8 0 0 x 1 2 0 0 N
1 2
1 8 0 0 x 1 2 0 0 N
1 2
1 8 0 0 x 1 2 0 0 N
1 2
1 8 0 0 x 1 2 0 0 N
