manualshive.com logo in svg

Ricoh SP 320SFN, User Manual

The Ricoh SP 320SFN is a versatile multifunction printer that combines printing, scanning, copying, and faxing capabilities. With its easy-to-use interface, accessing its full potential is made simple with the accompanying User Manual. Download this comprehensive manual for free at 88.208.23.73:8080 to explore all features and optimize your printing experience.

Share
Download
background image

compliant telephone cord and modular plug is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant. See installation instructions for
detail.

4. The REN is used to determine the number of devices that may be connected to a telephone line.

Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming
call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the
number of devices that may be connected to a line, as determined by the total RENs, contact the
local telephone company. The REN for this product is part of the product identifier that has the
format US:AAAEQ##TXXXXX. The digits represented by ## are the REN without a decimal point
(e.g., 03 is a REN of 0.3).

5. If this equipment causes harm to the telephone network, the telephone company will notify you in

advance that temporary discontinuance of service may be required. But if advance notice is not
practical, the telephone company will notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you believe it is necessary.

6. The telephone company may make changes in its facilities, equipment, operations or procedures

that could affect the operation of the equipment. If this happens the telephone company will
provide advance notice in order for you to make necessary modifications to maintain uninterrupted
service.

7. If trouble is experienced with this equipment, for repair or warranty information, please contact

Ricoh Americas Corporation Customer Support Department at 1-800-FASTFIX. If this device is
causing problems with your telephone network, the telephone company may request that you
disconnect the equipment until the problem is resolved.

8. In the event of operation problems (document jam, copy jam, communication error indication), see

the manual provided with this machine for instruction on resolving the problem.

9. Connection to party line service is subject to state tariffs. Contact the state public utility commission,

public service commission or corporation commission for information.

10. If your home has specially wired alarm equipment connected to the telephone line, ensure the

installation of this equipment does not disable your alarm equipment. If you have questions about
what will disable alarm equipment, consult your telephone company or a qualified installer.

WHEN PROGRAMMING EMERGENCY NUMBERS AND/OR MAKING TEST CALLS TO
EMERGENCY NUMBERS:

1. Remain on the line and briefly explain to the dispatcher the reason for the call before hanging

up.

2. Perform such activities in the off-peak hours, such as early morning hours or late evenings.

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or
other electronic device, including FAX machines, to send any message unless such message clearly
contains in a margin at the top or bottom of each transmitted page or on the first page of the
transmission, the date and time it is sent and an identification of the business or other entity, or other
individual sending the message and the telephone number of the sending machine or such business,

Information for This Machine

339

Summary of Contents for SP 320SFN





























































































































































































































































































































































































Reviews:

No comments

Related manuals for SP 320SFN

Oki C910 Service Manual preview
C910
Brand: Oki Pages: 282
Canon ImageCLASS MF3240 Series Advanced Manual preview
ImageCLASS MF3240 Series
Brand: Canon Pages: 62
Canon ImageCLASS MF4270 Operation Manual preview
ImageCLASS MF4270
Brand: Canon Pages: 226
Canon imageCLASS D660 Setup Instructions preview
imageCLASS D660
Brand: Canon Pages: 8
Canon ImageCLASS MF3240 Series Basic Manual preview
ImageCLASS MF3240 Series
Brand: Canon Pages: 136
Canon Color imageRUNNER C5180 Series Service Manual preview
Color imageRUNNER C5180 Series
Brand: Canon Pages: 851
Canon imageCLASS D320 Printer Manual preview
imageCLASS D320
Brand: Canon Pages: 121
Canon imageCLASS MF212w User Manual preview
imageCLASS MF212w
Brand: Canon Pages: 236
Canon imageCLASS D760 Reference Manual preview
imageCLASS D760
Brand: Canon Pages: 82
Canon imageclass LBP251dw Settings Manual preview
imageclass LBP251dw
Brand: Canon Pages: 72
Canon ImageCLASS MF4270 Basic Operation Manual preview
ImageCLASS MF4270
Brand: Canon Pages: 248
Canon ImageCLASS MF4270 Starter Manual preview
ImageCLASS MF4270
Brand: Canon Pages: 36
Canon imageCLASS D760 Setup Instructions preview
imageCLASS D760
Brand: Canon Pages: 8
Canon imageCLASS MF4100 Series Service Manual preview
imageCLASS MF4100 Series
Brand: Canon Pages: 140
Canon imageclass LBP251dw Getting Started preview
imageclass LBP251dw
Brand: Canon Pages: 116
Canon imageCLASS D860 Basic Manual preview
imageCLASS D860
Brand: Canon Pages: 73
Canon imageCLASS D1320 Starter Manual preview
imageCLASS D1320
Brand: Canon Pages: 36
Canon ImageCLASS MF3240 Series Starter Manual preview
ImageCLASS MF3240 Series
Brand: Canon Pages: 15

Brands by name

Popular brands

Load more brands