T
echnical
B
ulletin
PAGE: 54/58
Model:
Taurus-C1 / P1
Date:
21-Oct-11
No.:
RD074026
< Appendix: Specifications \ Main Specifications \ Main Machine Options \ A3/DLT
Tray Kit B8331 (Option) >
Supported paper weight was changed as follows:
52 - 210 g/m2
52.3 to 300 g/m2
< Appendix: Specifications \ Peripheral Specifications \ Decurler Unit DU5000 Unit
(D544) >
Power Consumption was corrected as follows::
Less than 30V
Less than 30W
< Appendix: Specifications \ Peripheral Specifications \ Booklet Finisher
SR5040/5030 (D512/D513) \ Punch Unit PU5000 (D449) (Option) >
AP (Asia-pacific) was added to the “2/4 hole selectable” along with Europe.
< Appendix: Service Program Mode Tables \ Group 1000 >
Before the Revision
After the Revision
1001 Lead Edge Reg
Adjusts the printing leading edge registration using
the trimming area pattern (Pattern No)
1001 Lead Edge Reg
Adjusts the printing leading edge registration using
the trimming area pattern SP2109-3 (Pattern No. 14)
1003 Side-to-Side Reg
Adjusts printing side-to-side registration for each
feed station, using the test pattern (Pattern No.)
1003 Side-to-Side Reg
Adjusts printing side-to-side registration for each
feed station, using the test pattern printed with
SP2109-3 (Pattern No. 14)
1013 Fine Adj Exit Motor Speed
20 to 21 Envelope: Weight 5 to 6
1013 Fine Adj Exit Motor Speed
20 to 22 Envelope: Weight 5 to 7
23 OHP
-
1021 Skew Detect was added.
-
1302 Dbl-Feed Detect was added.
-
1303 After Dbl-Feed Det Op Set was added.
-
1802 PPM Information was deleted.
-
1906 Decurler Setting
“Upper pass 2” was added.
1929 De-curl Line Speed Adj: Default
[-2.5 to +12.5 / 0 / 0.5%]
1929 De-curl Line Speed Adj: Default
[-2.5 to +12.5 /
1
/ 0.5%]
-
1946 Set Coolant Level Sensor was deleted.
-
1950 Image Pos: Sub: Side1 was added.
-
1951 Image Pos: Sub: Side2 was added.
-
1952 Image Pos: Main: Side1 was added.
-
1953 Image Pos: Main: Side2 was added.
-
1955 Skew Detect was added.
