T
echnical
B
ulletin
PAGE: 2/2
Model:
Taurus-C1a/C1b (D074/D075)
Date:
30-Sep-13
No.:
RD074108
Background
The “pre near end” alert message that appears on the operation panel tends to cause the
users to replace the toner bottler earlier than the appropriate timing, and as a result, toner
could be wasted. The new firmware will delay the display of “pre near end” to correspond
with the “near end” alert timing of the ProC901/C901s series as shown in the diagram
below.
* Number of pages is based on the following print conditions: A4, 8.75% coverage, 25 P/J
Notes on limitations:
The new default value of 3% does not appear in the SP.
Current controller firmware (System/Copy ver1.13 or older for Copier, System ver1.07
or older for Printer) only supports an adjustment range of 10%~100%.
DO NOT
modify these SP values. Modifying these SP values will set the default value
back to 10%. Once modified, the new default value of 3% cannot be retrieved.
Modify these SP values only when they need to be set to a value higher than 10%,
which should be decided based on the job operation requested by your customer.
The above limitations will be resolved in the succeeding controller firmware version to
be released.
(Old firmware)
(New firmware)
