Ricoh WG-4 Operating Manual Download

Page: 224 / 253

222

Appendi

Face Detection

Detection of up to 32 people’s faces (up to 31 face detection frames

on the display), Smile Capture, Blink Detection, Self-portrait Assist,

Self-portrait Smile Capture

* Face Detection AE is available only when the camera detects the

subject’s face.

Pet Detection

Detectable number of pets: 1

Shooting Mode

Auto Picture, Program, Shutter Priority, USER, HDR, Handheld Night

Snap, Movie, Underwater, Underwater Movie, Digital Microscope,

Landscape, Flower, Portrait, Interval Shot, Interval Movie, High Speed

Movie, Time-Lapse Movie, 1cm-Macro Movie, Digital SR, Surf &

Snow, Kids, Pet, Sport, Night Scene, Night Scene Portrait, Fireworks,

Food, Report, Green

Digital Filter

B&W/Sepia, Toy Camera, Retro, Color (red, pink, purple, blue, green,

yellow), Extract Color (red, green, blue), Color Emphasis (Sky Blue,

Fresh Green, Delicate Pink, Autumn Leaves), High Contrast,

Starburst (Cross, Heart, Star), Soft, Fish-eye, Brightness, Miniature

Movie

Continuous

Recording Time

Approx. 1 second - 25 minutes (however, only until the

built-in memory or SD Memory Card is full)

Shutter Speed

1/4000 sec. - 1/4 sec. (mechanical and electronic shutters),1/2000

sec. - 4 sec. (Shutter Priority or Night Scene mode)

Built-in Flash

Modes

Auto, Flash Off, Flash On, Auto + Red-eye, Flash

On + Red-eye

Flash Range

Wide-angle: approx. 0.2 - 10.4 m

(approx. 0.66 - 34 ft.) (Sensitivity: AUTO)

Telephoto: approx. 0.2 - 4.2 m

(approx. 0.66 - 14 ft.) (Sensitivity: AUTO)

Drive Mode

Single-frame, Self-timer (10 sec., 2 sec.), Continuous Shooting, Burst

Shooting, Remote Control (0 sec., 3 sec.), Auto Bracketing

Self-timer

Electronic control type, control time: Approx. 10 sec., 2 sec.

Time Function

World Time

75 cities (28 time zones)

Clock Display

Clock Display by holding down

button while

camera is turned off (for approx. 10 sec.)

Alarm

Alarm with simultaneous display of the Clock
Display at specified time

Power Source

Rechargeable lithium-ion battery D-LI92, AC adapter kit (optional)

Battery Life

Image Storage

Capacity

Approx. 240

pictures

* Recording capacity shows the approximate

number of shots recorded during CIPA-compliant

testing (at 23°C (73.4°F) with display on and flash

used for 50% of the shots). Actual performance

may vary according to operating conditions.

Playback Time

Approx. 200 min.

* According to the results of in-house testing.

Movie Recording

Time

Approx. 65 min.

* According to the results of in-house testing.

Interfaces

USB 2.0 (high-speed compatible) /USB/AV terminal /

HDMI terminal (Type D (Micro))

Summary of Contents for WG-4






























































































































































































































































Search results

Summary of Contents for WG-4

Reviews:

Related manuals for WG-4

Brands by name

Popular brands

Ricoh WG-4, Operating Manual

Search results

Summary of Contents for WG-4

Reviews:

Related manuals for WG-4

Brands by name

Popular brands