Ricon 20-600H, Operator'S Manual

GETTING TO KNOW YOUR MACHINE

CONTENTS OF PACKAGE

7

Model 20-600H Jointer is shipped complete in one box.

Unpacking and Clean-up

1.  Carefully remove all contents from the shipping carton. Compare the contents with the list of contents to make sure                        

     that all of the items are accounted for, before discarding any packing material. Place parts on a protected surface 

     for easy identification and assembly. If any parts are missing or broken, please call RIKON Customer Service (877-    

     884-5167) as soon as possible for replacements. DO NOT turn your machine ON if any of these items are missing.

     You may cause injury to yourself or damage to the machine.

2.  Report any shipping damage to your local distributor.

3.  Clean all rust protected surfaces with ordinary house hold type grease or spot remover.  Do not use; gasoline, paint      

     thinner, mineral spirits, etc. These may damage painted surfaces. 

4.  Apply a coat of paste wax to the tables to prevent rust. Wipe all parts thoroughly with a clean dry cloth. Be careful

     when working, as the jointer insert knives are sharp and may cause injury if touched.

5.  Set packing material and shipping carton aside. Do not discard until the machine has been set up and is running   

     properly.

J

B

SEE PAGES 20 & 21

FOR THE 

PARTS DIAGRAM AND

PARTS LIST

A

E

D

F

C

H

G

I

E

K

L

M

B

N

O

A    On / Off Safety Switch
B    Dust Port
C    Outfeed Table 
D    Cutterhead Guard
E    Fence    
F    Infeed Table
G   Power Cord
H   Depth of Cut Adjustment Knob 
I     Depth of Cut Scale
J    Depth of Cut Lock Knob
K    Drive Belt / Guard
L    Rubber Foot Pads
M   Mounting Holes 

N   Fence Bracket Locking Handle 
O   Fence Support Locking Handle

J

C