9
ASSEMBLY
THE MACHINE MUST NOT BE PLUGGED IN AND THE POWER SWITCH
MUST BE IN THE 'OFF' POSITION UNTIL ASSEMBLY IS COMPLETE.
FENCE ASSEMBLY PROCEDURE
1. Assemble the Fence Bracket (A) to the jointer base
(B). Use the four Socket Button Head Screws (C) to
lock the bracket in place. FIG. 1.
FIG. 1
FIG. 2
2. Assemble the Fence Sliding Bracket (E) to the
Fence (F).The Square Nut (G) should fit in the groove
of the fence. FIG. 2.
3. Adjust the fence sliding bracket (E) to the middle of
the fence at the center of the fence cut-out (H). Use
two M6x16mm socket button head screws (I) to lock
the sliding bracket in position. FIG. 3.
FIG. 4
4. Locate the Sliding Bracket & Fence Assembly onto
the mounting bracket on the body of the jointer. Insert
the tilt lock Lever Assembly (J) with the flat washer (B)
in place. FIG. 4.
FIG. 3
CONTINUED ON PAGE 10
E
F
J
G
H
I
I
A
B
E
C
Summary of Contents for 20-600H
Page 23: ...23 WARRANTY...
