![background image](http://html1.mh-extra.com/html/ridder-drive-systems/polydrive-rpd-506-series/polydrive-rpd-506-series_product-manual_1457672003.webp)
1. GUIDELINES, STANDARDS AND CONDITIONS
1.1 Applicable guidelines and standards
This product complies with the provisions of the European guidelines that follow:
Machinery Directive 2006/42/EC | Low Voltage Directive 2006/95/EC | EMC Directive 2004/108/EC
The harmonized standards (or parts of these standards) that follow are applicable:
NEN-EN-ISO 12100:2010 | NEN-EN-IEC 60204-1 |
NEN 82079-1 (62079: 2001) | NEN5509 | ISO 3864-2
Make sure that this product is only put into operation if the system (in which it will be installed)
complies with the provisions of the applicable standards and guidelines.
1.2 Approved personnel
This product manual contains important information for installers about the installation and
commissioning of a PolyDrive RPD motor gearbox. Read this product manual and instructions
first before the work starts. Approved mechanical and/or electrical installers, with professional
competence, must do all work safe and responsible.
TARGET GROUP FOR EACH CHAPTER
CHAPTER (refer to Table of Contents)
TARGET GROUP
1 2 3 4 5 6 7 8 9 10
User (operator)
• • •
•
(•)
Installer / Approved personnel
• • • • • • • • • •
(•) = Not fully applicable
Keep this product manual with the product during the lifespan. Make sure that it is available for
users (operators), installers and approved personnel.
1.3 Warning about discouraged use
The conditions that follow are applicable:
•
Do not change (the construction of) the RPD motor gearbox.
•
It is not permitted to weld to the drive-unit or its parts.
•
It is not permitted to use the RPD motor gearbox to lift or move people.
•
It is not permitted to use the RPD motor gearbox for hoist functions.
•
Do not let the torque of the RPD motor gearbox be more than its maximum.
•
Do not let the duty cycle of the RPD motor gearbox be more than its maximum.
•
It is not recommended to use the RPD motor-gearbox in (almost) frictionless systems, that move
easy and are not physically stopped at the end position. Refer to §2.3.
Refer to §3.3 for a description of the intended use.
Regulatory Conformity
Ridder Drive Systems B.V.
T
+31 (0)341 416 854 -
F
+31 (0)341 416 611 -
I
3
Summary of Contents for PolyDrive RPD 506 Series
Page 36: ......