5
zone. During a crash, this isolates the canopy from impact loads, delivering durability based on sound
engineering.
CFT is a unique approach to the tasks of distributing shock loads and effective transfer of TE tension
across the canopy of your kite. With CFT, a lightweight but incredibly strong ‘buffer zone’ is stitched into
the canopy sections and between the airframe and canopy. Due to the unique continuous curved shape
of CFT, impact energy is harmlessly circulated around the kite until completely dissipated.
Load Flex LE Seam:
The 09 Waroo LE seam is triple stitched with a full length webbing tape closure and
internally shielded by mark cloth tape.
The Load Flex seam design provides additional support to the leading edge, helping to
provide maximum strength and stability to your kite.
3D Kevlar Airframe:
All LE strut joints are laser cut, shaped and Kevlar tape reinforced. There is no better
way to connect the leading edge to the struts. Our construction yields the strongest and
lightest airframe possible which translates into added performance and maximum
durability.
Dacron Wingtip Panels:
Multi-layer Dacron wingtip panels distribute turning forces for unmatched responsiveness and enable self-
launching without risk of damage. Increased surface area at the wingtips gives greater turning agility,
while our curved wingtip profile improves aerodynamics and eliminates vortex-induced drag.
Kevlar Wingtip and LE Patches:
However and wherever you ride, your kite will come into contact with the ground at some
point. Our Kevlar reinforced LE and wingtip patches give maximum abrasion resistance
to protect your kite, even when self-launching in less than ideal situations.
Woven Spectra Serviceable Pulley Lines:
High strength wear-resistant 4mm braided abrasion-resistant pulley lines with precision Ronstan
pulleys
provide friction-free depower action. Combined with our new VP2 bridle design, they deliver unbelievable
depower and wind range.
TE Battens:
Precision-tolerance fibreglass battens support the trailing edge canopy section and
smoothes the airflow over the trailing edge. Improved aerodynamics ensure faster
turning and silent maneuvering, while our smooth pocketed mark-cloth construction
delivers outrageous durability.
CFT Reinforced Trailing Edge:
Like all kites in our ‘08 range, the Waroo benefits from our exclusive CFT reinforced
trailing edge, which provides razor-sharp turning response and unmatched durability
compared to all other trailing edge construction techniques.
Summary of Contents for 2009 WAROO
Page 1: ...1 ...
