RIDEMAKERZ.COM
1-866-58-RIDEZ (74339)
8 RIDE ASSEMBLY
street
RIDE ASSEMBLY
ASSEMBLING YOUR RIDE
1.
Flip your RIDE body and chassiz upside-
down (Place on a surface that won’t
scratch your RIDE).
2. Locate the arrow on your chassiz la-
beled “FRONT” to correctly align your body
and chassiz.
3. Lower the chassiz onto your RIDE body,
making sure to line up the posts of the body
to the hex slots on the chassiz.
4. Using your Hex Key, screw in one screw
(not all the way). To avoid damaging your
RIDE, screw in only until there is some
resistance.
5. Now partially tighten the screw
located diagonally from your first one. For
instance, if you started with the right front
screw, continue by screwing the left rear
screw.
6. Continue to the next two screws, screw-
ing them in until there is resistance.
7. Now you can screw all the screws in
until firm. Don’t over tighten!
You can easily swap out body styles or switch between Street or Monster
chassiz! NOTE: Some bodiez do vary in wheelbase (length between front
& back treadz), so there are two different chassiz lengths to fit each
RIDE. Your chassiz wheelbase must match your RIDE wheelbase.
REAR
FRONT
1
3
4
2
