Press
+ keypad button 1-9 to quick call out the saved data (as shown
above in figure 3) from the corresponding data group. Press
to confirm, it will
show
,
after change the setting value it will show
. When disable the “Take
OK” option, it will be called out directly to change the data setting value, no prompt.
is the default data group, when you edit the settings and press
button or
rotate encoder potentiometer to change the setting and press encoder
potentiometer to return, it will be stored into M0 automatically, or you go to the data
group setting menu, change the setting and press encoder potentiometer to return,
it will save too, and it will not save by other settings.
1.4.2.4
Keypad lock and unlock
Keypad lock operation video
：
https://drive.google.com/drive/folders/121yIfNLh3O99AU4tUkxtC5q34XT3s
nn1?usp=sharing
Press
+
to lock or unlock the keyboard. And the keypad will be
automatically locked when communication starts, there will be
displayed on the
top (cannot unlock manually), and the keypad will be automatically unlocked when
the connection disconnected manually, there will be
displayed, the keypad will
be automatically unlocked after 3 seconds when the connection disconnected
abnormally, and the power off button can be used when the keypad is locked.
1.4.2.5
System Setting
System setting operation video
：
https://drive.google.com/drive/folders/1JCPJkD92Iv2Qtplmd6rs1pQma
js1EsVB?usp=sharing
Press
+
to enter the system setting menu, the icon in Red shows the
menu being chosen,
press
or
to enter the sub-menu, the option in blue
is the option being chosen, you can rotate the encoder potentiometer to change
setting, and you can press
button to select menu.
Summary of Contents for RD6006P
Page 33: ......
