声明：本说明书著作权归杭州睿登科技有限公司所有，未经允许任何单位或个人不得用于商业用途。
50
1.4.2.6 Main Page Display Style Setting
Main interface display style setting operation
video:
https://drive.google.com/drive/folders/1gMkuCZr
r_G-PlyHqO-i6fxdS-XRvuOIG?usp=sharing
You can press
+
to enter the system
setting menu, then press
and it will be switched
to display style menu(as shown in figure 10): you can
press
or
to enter the sub-menu.
Layout Sub-menu:
Digits Style
is set to Normal by default, you can
set it to Normal/7-Seg V1/7-Seg V2(as shown in figure
11).
Home Style
is set to 0(traditional style), you can
also set it to 1(Detail Style) or 2(Curve Style), the
display style you choose will become the default style
after power on.
Custom Colors(figure 12):
You can set the the display colors for output
voltage, output current, output power.....as shown in
figure 10 and figure 11. After change the color, you
need to turn on the
Custom Colors
option to apply the
settings(as shown in figure 13).
1.4.2.7 Storage Data Setting
Data group setting in manual operation video:
https://drive.google.com/drive/folders/13APYtlR
AaMcKmStbWM8toB8oOW5wi4ph?usp=sharing
You can press
+
to enter the system
setting menu, and then press
button twice to
enter the data storage setting menu(as shown in figure
14).
Press the Enter button to enter the sub-menu,
press the direction button to choose the data group,
you can rotate the encoder potentiometer to switch
6A and 12A range, then set the value.
Press
button to set the output current value, you can use encoder
figure 9
figure 10
figure 11
figure
12
figure 13
