声明：本说明书著作权归杭州睿登科技有限公司所有，未经允许任何单位或个人不得用于商业用途。
51
potentiometer to adjust the output value directly. And you will not set the value
which exceeds the limit in this way, press
button to move the cursor. Of
course you can use keypad to type in the value, and press
to confirm, and it
will save the set value and set current range, if you set a value exceeds the limit, it
will prompt like what shows in Figure 1. If you set the wrong value, you can press
encoder potentiometer to cancel.
Press
button to set the output voltage
value, the operation way is similar to output current
setting.
Press
+
button /
+
button to
set the over current protection/ over voltage
protection value. The operation method is similar to
output current setting.
After setting, press the encoder potentiometer to return and save setting.
1.4.2.8 System Information
System information operation video:
https://drive.google.com/drive/folders/1APFNHtOufuh46rc5i2XTZKrQoTqgHdUr
You can press
+
to enter the system setting menu, and then press
button 3 times to enter the system information menu(as shown in figure 15).
Product Model
is the device name,
Product SN
is product serial number,
Firmware
is the firmware version,
Temperature
is the System temperature.
figure 14
figure 15
