Ridetech RidePROe5 Installation Manual & Operation Manual Download

Page: 1 / 21

Installation Guide

& Operation Manual

Component Installation

Mounting

compressor

........................................................

Mounting

tank

.......................................................................

Mounting air valves .............................................................

Routing air lines & fittings .................................................

Mounting pressure sensors ...............................................

Mounting the controls & ECU ...........................................

Wiring

........................................................................................

Control Panel Features ................................................. 4

Level Sensor Installation

Installing external ride height sensors ..........................

Connecting harnesses to ECU ..........................................

Sensor rod assembly............................................................

Example

installations

..........................................................

AirPod™ Installation

Mounting the unit ................................................................

Wiring

........................................................................................

System Control Options & Icons .................................. 8

Control Panel Users Guide ......................................9-13

Calibration .................................................................14

Troubleshooting Guide .........................................15-16

Tips and Tricks ............................................................ 17

Error Codes and Text .............................................18-19

Plumbing Diagrams....................................................20

Wiring Diagrams ...........................................back cover

Contents

Thank you for choosing a Ridetech air suspension control system. We are committed to providing the best experience

possible throughout the process of getting your car on air.

Our commitment doesn’t end with your purchase, in fact, it has only begun. This guide should provide you with the

information you need to properly install and set-up your suspension control system.

However, if you find yourself having difficulty or if you have a question that isn’t covered in this book, please call our tech

department.

Tech Line: 812-481-4969

Website: www.ridetech.com

In addition to phone support, our website also provides a wealth of helpful product, install, and set-up information.

Summary of Contents for RidePROe5






















Search results

Summary of Contents for RidePROe5

Reviews:

Related manuals for RidePROe5

Brands by name

Popular brands

Ridetech RidePROe5, Installation Manual & Operation Manual

Search results

Summary of Contents for RidePROe5

Reviews:

Related manuals for RidePROe5

Brands by name

Popular brands