6
Warning:
•
NEVER
use any fuel-burning products inside or within close proximity of your Escape XF1 bivvy.
Doing so can result in the accumulation of dangerous concentrations of carbon monoxide
which can be fatal.
•
While the Escape XF1 is built using CPAI-84 flame resistant fabric, it is not fireproof and will
burn if left in continuous contact with an open flame or other heat source. Failure to keep
flame and heat sources away from the Escape XF1 can lead to fire which may result in serious
injury or death.
•
Always peg down your Escape XF1 properly to reduce the risk of loss or injury. Enough pegs
and guy ropes are supplied to safely secure your Escape XF1 in most situations, however
it may be necessary to purchase additional pegs and ropes for use in extreme conditions.
Tightly tensioning your Escape XF1 with the included guy ropes further increases its strength
and stability and we recommend that you do so whenever possible.
•
Always maintain adequate ventilation inside your Escape XF1 at all times to help reduce
the build-up of condensation, moisture and odour. Use of the flysheet will also help to maintain
temperature and prevent the build-up of condensation inside the Escape XF1.
