2 - English
GENERAL SAfETY RULES
WARNING:
READ AND UNDERSTAND ALL INSTRUcTIONS.
Failure to follow all instructions listed below, may
result in electric shock, fire and/or serious personal
injury.
READ ALL INSTRUcTIONS
KNOW YOUR PRODUcT.
Read the operator’s manual
for this product and for any tool being used with this work
station.
MAKE SURE ALL MOvING PARTS ARE fREE fROM
INTERfERENcE.
KEEP HANDS fREE Of ALL MOvING PARTS
to avoid
pinching and other injuries.
PLAcE THE WORK STATION ON A fIRM, LEvEL
SURfAcE
where there is plenty of room to handle and
properly support the workpiece.
MAKE SURE WORKPIEcES ARE PROPERLY
SUPPORTED.
NEvER PERfORM WORK
on the work station outside
the width of the front legs. Doing so may cause the work
station to become unbalanced and tip.
cHEcK THAT ALL ScREWS AND KNOBS
are tight and
legs are securely locked before operating this product.
DO NOT USE AS A STEPLADDER, STANDING PLAT-
fORM, OR ScAffOLDING SUPPORT.
STOP IMMEDIATELY If THE WORKPIEcE OR WORK
STATION MOvES WHEN OPERATING.
SAvE THESE INSTRUcTIONS.
Refer to them frequently
and use them to instruct other users. If you loan someone
this product, also loan these instructions.
fEATURES
PRODUcT SPEcIfIcATIONS
Clamping range ..................................................................................................................................................0 - 37-1/2 in.
Clamping force .............................................................................................................................................2,000 lbs. (1 ton)
Maximum load ............................................................................................................................................................ 220 lbs.
Fig. 1
REAR LOCK
KNOB
FIXED
CLAMP
FOOT PEDAL
RELEASE
RIghT
FRONT LOCK
KNOB
REAR
LEg
LEFT FRONT
LOCK KNOB
LOCK / uNLOCK
LATCh
FOOT
PEDAL
LOCK
uNLOCK
LEFT
FRONT
LEg
RIghT
FRONT
LEg
SLIDINg
CLAMP
ARM
TRANSPORT
LOCK
