background image

18

19

WARRANTY

Proof of purchase must be presented when requesting 
warranty service. 

This product is manufactured by One World Technologies, 
Inc. The trademark is licensed from RIDGID, Inc.  All warranty 
communications should be directed to One World Technolo-
gies, Inc., attn: RIDGID Pneumatic Tool Technical Service at 
(toll free) 1-866-539-1710. 

90-DAY SATISFACTION GUARANTEE POLICY 

During the first 90 days after the date of purchase, if you are 
dissatisfied with the performance of this RIDGID

®

 Pneumatic 

Tool for any reason you may return the tool to the dealer 
from which it was purchased for a full refund or exchange. 
To  receive  a  replacement  tool  you  must  present  proof  of 
purchase and return all original equipment packaged with 
the original product. The replacement tool will be covered by 
the limited warranty for the balance of the 3-YEAR service 
warranty period. 

WHAT IS COVERED UNDER THE 3 YEAR 
LIMITED SERVICE WARRANTY 

This warranty on RIDGID

®

 Pneumatic Tools covers all defects 

in workmanship or materials and normal wear items for three 
years following the purchase date of the tool. Warranties for 
other RIDGID

®

 products may vary. 

HOW TO OBTAIN SERVICE

To obtain service for this RIDGID

®

 tool you must return it; 

freight prepaid, or take it in to an authorized service center 
for RIDGID

®

 branded pneumatic tools. You may obtain the 

location  of  the  authorized  service  center  nearest  you  by 
calling  (toll  free)  1-866-539-1710  or  by  logging  on  to  the 
RIDGID

®

  website  at  www.ridgid.com.  When  requesting 

warranty service, you must present the original dated sales 
receipt. The authorized service center will repair any faulty 
workmanship, and either repair or replace any part covered 
under the warranty, at our option, at no charge to you.

One World Technologies, Inc.

P.O. Box 35, Hwy. 8

Pickens, SC 29671

WHAT IS NOT COVERED

This warranty applies only to the original purchaser at retail 
and may not be transferred. This warranty only covers de-
fects arising under normal usage and does not cover any 
malfunction, failure or defect resulting from misuse, abuse, 
neglect, alteration, modification or repair by other than an 
authorized service center for RIDGID

®

 branded pneumatic 

tools. Consumable accessories provided with the tool such 
as, but not limited to, fasteners, oil, and safety glasses are 
not covered. 
RIDGID,  INC.  AND  ONE  WORLD  TECHNOLOGIES,  INC. 
MAKE NO WARRANTIES, REPRESENTATIONS OR PROM-
ISES  AS  TO  THE  QUALITY  OR  PERFORMANCE  OF  ITS 
PNEUMATIC TOOLS OTHER THAN THOSE SPECIFICALLY 
STATED IN THIS WARRANTY. 

ADDITIONAL LIMITATIONS

To the extent permitted by applicable law, all implied war-
ranties, including warranties of MERCHANTABILITY or FIT-
NESS FOR A PARTICULAR PURPOSE, are disclaimed.  Any 
implied warranties, including warranties of merchantability 
or fitness for a particular purpose, that cannot be disclaimed 
under state law are limited to three years from the date of 
purchase. One World Technologies, Inc. and RIDGID, Inc. 
are not responsible for direct, indirect, incidental or conse-
quential damages. Some states do not allow limitations on 
how long an implied warranty lasts and/or do not allow the 
exclusion or limitation of incidental or consequential dam-
ages, so the above limitations may not apply to you. This 
warranty gives you specific legal rights, and you may also 
have other rights which vary from state to state. 

RIDGID

®

 PNEUMATIC TOOL 3 YEAR LIMITED SERVICE WARRANTY 

Summary of Contents for R250SFA





















Reviews: