This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Changes or modifications made to this equipment not expressly approved by Riedel may void the FCC authorization to operate this equipment.
Radiofrequency radiation exposure Information:
For body worn operation, this equipment has been tested and meets the FCC RF exposure guidelines when used with the Riedel accessories
supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
Este produto está homologado pela Anatel, de acordo com os procedimentos regulamentados pela Resolução n°. 242/2000 e atende aos requisitos
técnicos aplicados, incluindo os limites de exposição da Taxa de Absorção Específica referente a campos elétricos, magnéticos e eletromagnéticos
de radiofreqüência de acordo com as Resoluções n°. 303/2002 e 533/2009.
This device is granted pursuant to the Japanese Radio Law (
) and the Japanese Telecommunications Business Law (
). This device
should not be modified (otherwise the granted designation number will become invalid).
Taiwan NCC Warning Statement
(930322)
The device conforms to the following EU guidelines
as attested by the CE mark.
·
EMV (EMC) 2014/30/EU
·
NSR (LVD) 2014/35/EU
·
RTTE (RED) 2014/53/EU
YFJBPK100419
Industry Canada
8706A-BPK100419
Standards
·
EN 300 328 V1.9.1 / ETSI EN 300 328 V2.0.20
·
EN 300 330 V1.8.1 / ETSI EN 300 330 V2.1.0
·
EN 301 406 V2.2.1
·
EN 301 489-1/-3/-6/-17, EN 55022, EN 55024
·
IEC/EN 60950-1
Australia
Any device that connects to the
data ports must comply with the
clause 4.7 of AS/NZS 60950.1
Singapore
Complies with
IMDA Standards
DB105184
03-303HB01EG-A30
Bolero S-Beltpack Quick Start Guide
© July 2018 Riedel Communications GmbH & Co. KG. ALL RIGHTS RESERVED.
UNDER THE COPYRIGHT LAWS, THIS MANUAL MAY NOT BE COPIED, IN WHOLE OR IN PART, WITHOUT THE WRITTEN CONSENT OF RIEDEL. EVERY
EFFORT HAS BEEN MADE TO ENSURE THAT THE INFORMATION IN THIS MANUAL IS ACCURATE. RIEDEL IS NOT RESPONSIBLE FOR PRINTING OR
CLERICAL ERRORS. ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS.
