3
Bolero S-Beltpack Quick Start Guide A30
1 Information
Service
·
All service has to be undertaken ONLY by qualified service personnel.
·
Do not plug in, turn on or attempt to operate an obviously damaged device.
·
Never attempt to modify the equipment components for any reason.
Caution
!
All adjustments have been done at the factory before the shipment of the devices.
No maintenance is required and no user serviceable parts are inside the module.
Battery Safety
The Bolero-S-Beltpacks are operated with the following battery type: Lithium-Ion, 3.6V, 2.4Ah, 8.6Wh, 1ICP7/39/65,
with integrated electronics. For best performance charge the battery fully before initial use or reusing it after being
stored for a long period. In order to ensure air transport safety, the Bolero-S-Beltpack is tested according to UN
38.3 – Transport of dangerous goods.
Warning
!
There is a risk of fire and burns if the battery pack is handled improperly.
·
Do not short-circuit.
·
Do not dismantle, open, crush, heat above 60°C (140°F) or incinerate.
·
Recycle or Dispose of property.
·
Charge before initial use.
·
Use the specified Riedel Bolero Charger only or charge the Bolero-S-Beltpack.
·
Do not charge using any other equipment.
·
Do not connect the contacts to any other equipment.
Further recommendations:
·
Avoid storage in direct sunlight.
·
Do not subject Bolero-S-Beltpacks to mechanical shock.
·
In the event of a cell leaking, do not allow the liquid to come into contact with the skin or eyes.
If contact has been made, wash the affected area with copious amounts of water and seek
medical advice.
·
Keep Bolero-S-Beltpacks out of the reach of children.
·
Keep Bolero-S-Beltpacks clean and dry.
·
Wipe the terminals with a clean dry cloth if they become dirty.
·
Use the Bolero-S-Beltpacks only in the application for which it was intended.
