9
Bolero S-Beltpack Quick Start Guide A30
6 Technical Specifications
Beltpack Product Code
BL-BPK-1004-19
Multi-path delay spread
protection
Yes, ADR (Advanced DECT Receiver)
Audio Bandwidth
200 Hz ... 7 KHz (-3dB)
Mode of Operation
Full-duplex on all routes
Encryption
AES256 Bit encryption
Line In
No
Talk Controls
4x push buttons (momentary, latching & auto mode)
+ 2 volume keys
Volume / Level Controls
Volume keys programmable (Master, individual)
Display
No
Audio prompts
Out of range, Battery full, Battery good, Battery low,
Beltpack registered
No. of Full-Duplex Audio Paths
4 with individual level control
Vibrate Module
Vibrate indicates incoming call or silent call is active
Remote Health Monitoring
Remote via antenna and computer (Battery remaining time)
Battery
Lithium Ion internal battery
USB Connection
USB-2.0 Type C connector for firmware update and
Beltpack charging
Operation Time
~7 hours typical
Headset Connector
6-pin male Hirose HR10
Microphone Type
Electret (~5V bias voltage) or dynamic, user selectable or automatic
Side-tone and microphone gain
Individually adjustable for each Beltpack & via remote control
Bluetooth
No
Beltclip
Yes, user removable clip (optional)
Lanyard anchor points
Yes
Environmental
IP65 sealing, dust tight + water jet from all angles
Storage Temperature
-20° ... +70°C
Operational Temperature
-10° … +55°C
Humidity
0 % ... 90 % rel. (non-condensing), Ta=40°C
Dimensions
Width
75.5 mm / 2.97"
Height
118 mm / 4.64"
Depth
26.5 mm / 1.04"
Weight
165 g / 5.82 oz (without clip)
