Instructions Manual:
Electronic lock VT-110
Model:
______________________________
März
04/UR
Thank you!
Congratulations for purchasing this product!
To ensure that the lock functions free of any trouble, we strongly advise you to read
the instruction manual very carefully before using it. Please keep this manual, as it
contains valuable information in case your electronic lock needs to be serviced.
1. Putting the lock into operation:
Before putting the lock into operation, please take the following steps for safety
reasons:
•
Install the batteries according to item 5 of the instruction manual.
•
Change the factory user code
m
m
m
m
according
to item 4 of the instruction
manual.
•
Change the factory emergency code
u
u
u
u
according
to item 6 of the
instruction manual.
2. Opening the lock:
The lock opens if it recognises memorised your secret code. On opening the lock for
the first time, you must enter the present factory code. Later, after your have
programmed the lock, you will use your personal 3 to 8 digit code. Don’t wait longer
then 20 seconds between each step when opening the safe, else the lock disconnects.
To open the safe, proceed as follows:
•
Press START.
•
Enter your 3 to 8 digit code
n
n
n
n
n
n
n
n
(factory user code
m
m
m
m
)
.
•
Press START.
•
Turn the handle to the right.
•
The door is open.
Should you enter a wrong code, you will hear 3 short beeps and the lock won’t open.
After entering a wrong code 4 times, the buzzer will give an alarm signal for 3
minutes.
To avoid anyone seeing your secret code when entering it, just press the START key
twice. The digits won’t appear on the display.
3. Closing the safe
•
Close the door.
•
Turn the handle to the left.
•
The safe is closed.
•
Check whether the door is properly locked.
4. Memorising your user code:
You can programme your own user code. Please notice that this manipulation will
overwrite the old code. Do not use codes referring to your person such as date of
birth, telephone numbers etc. Keep your code in a safe place but never inside of your
safe. Should you accidentally make a wrong manipulation, your old code will stay in
the memory. To program a new secret code, proceed as follows:
•
Open the door according to item 2 of the instructions manual.
•
Press the red RESET button on the inside of the door.
•
Enter your new 3 to 8 digit code
n
n
n
n
n
n
n
n
.
