2
CONTENTS
TECHNICAL DATA
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . page
3
Burner models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Burner description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Packaging - Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Max. dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Standard equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Firing rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Boiler plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Blast tube length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Securing the burner to the boiler . . . . . . . . . . . . . . . . . . . . . . . 6
Choice of nozzles for low and high fire . . . . . . . . . . . . . . . . . . . 6
Nozzle assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Combustion head setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Fuel supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Hydraulic connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Burner calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Final check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Burner operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Factory wiring diagram - burner mounted LAL control. . . . . . . 13
Field wiring diagram- burner mounted LAL control . . . . . . . . . 14
Factory wiring diagram - remote panel . . . . . . . . . . . . . . . . . . 15
Appendix - Burner firing rates according to air density. . . . . . . . . .16
Siemens LAL control sequence of operations . . . . . . . . . . . . . 17
Siemens LAL control troubleshooting guide . . . . . . . . . . . . . . 18
Start up report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
N.B.
Figures mentioned in the text are identified as follows:
1)(A)
= part 1 of figure A, same page as text;
1)(A)p.4 = part 1 of figure A, page number 4.
WARNING
Do not store flammable or hazardous materials in the vicinity
of fuel burning appliances.
Improper installation, adjustment, alteration, service or main-
tenance can cause property damage, personal injury or
death. Refer to this manual for instructional or additional in-
formation. Consult a certified installer, service representative
or the gas supplier for further assistance.
Burner shall be installed in accordance with manufacturers
requirements as outlined in this manual, local codes and au-
thorities having juristiction.
