- 34 -
D
EFAULT CONFIGURATION OF THE INPUT
/
OUTPUT SIGNALS
O
UTPUT SIGNALS CONFIGURATION
(
FACTORY DEFAULT
)
Table 3
(below) lists the default configuration of the output signals.
OUTPUT
FUNCTION
DESCRIPTION
OUT 1
Load on Bypass
Load on bypass with closed contact between pin 2 and pin 4;
Otherwise, closed contact between pin 1 and pin 4.
OUT 2
Battery working
UPS in battery working with closed contact between pin 3 and pin 4.
OUT 3
Battery low
Battery low with closed contact between pin 8 and pin 6;
Otherwise, closed contact between pin 8 and pin 5.
OUT 4
Fault or Lock (F+L)
Fault or lock alarm with closed contact between pin 7 and pin 8.
Table 3 – Default configuration for output signals
I
NPUT SIGNALS CONFIGURATION
(
FACTORY DEFAULT
)
Table 3.1
(below) lists the default configuration of the programmable input signals as provided for factory default setting.
INPUT
FUNCTION
DESCRIPTION
IN 1
-
-
IN 2
-
-
IN 3
-
-
IN 4
-
-
IN 5
System ON
By externally connecting pin 5 and pin 6 with normally open contact, when it is closed
the UPS switching on.
Table 3.1 – Configuration of input signal in factory default
