GENERAL
21
There are 4 different user levels:
- End user
- Commissioning
- Heating engineer
- OEM (Manufacturer).
See the “Complete list of parameters” section for a list of
the parameters displayed in each level.
Proceed as follows to access the user level you require.
- Go to the main screen.
If necessary, press the "
ESC
" button one or more times
to return to the main screen.
Press the "
OK
" button.
Press and hold the information button "
i
" for 3 seconds.
- End user level. Turn the knob to scroll through the menu
until you reach the end user programming level. Press
"
OK
".
To enter the OEM level, you need to enter the
Password (12434) .
Press the "
OK
". button to confirm each digit. Press "
ESC
"
to cancel an entry.
b
- Pressing the "
ESC
" button takes you just one step
back: the value entered is not saved.
- If no change is made for 8 minutes, the system
returns to the main screen.
- Programming lines are displayed or hidden accor-
ding to the system configuration and the user level
(User, Commissioning, etc.).
b
Parameter values on the Commissioning, Heating
engineer and OEM levels must only be changed by
the
r
Technical Assistance Service.
EXAMPLE: SETTING THE CURRENT TIME
- From the main screen press "
OK
".
- The message area displays a number of setting pages.
Turn the knob until you reach the “Time and date” line.
Press "
OK
" to confirm.
Boiler temperature
End user
Commissioning
Time of day and date
Operator unit
User levels
USER LEVELS
