INSTALLER
30
Once you have removed the packaging, proceed as follows to handle the boiler.
- Remove the top panel (6) by pulling it upwards
- Remove the screws (2) securing the boiler to the wooden pallet
- Make sure that the equipment you use to move the boiler is adequate for the weight involved
- Lift the boiler carefully off the pallet using the eyebolts (4) inside the unit.
b
Wear suitable personal protective equipment and use suitable safety devices.
b
Remove the protective film (F) from the boiler’s front panel and control panel.
b
To level the boiler, use the hexagonal head screws accessible though the slots (V) on either side of the boi-
ler (two screws per side) .
a
Do not leave packaging material within the reach of children, since it can become a potential hazard. Dispose of
packaging material in compliance with applicable legislation.
F
V
2
4
6
2
2
2
V
Handling
HANDLING
