10
INSTALLER
INSTALLER
10
UNPAckINg ThE PRoDUcT
R
7200/1 Plus
storage cylinders are delivered in a single
package, protected by a cardboard box on a wooden pallet.
The following items are delivered in a plastic bag inside the
packaging:
− Instruction manual
− Certificate of warranty and label with bar code
− Spare parts catalogue
− Hydraulic test certificate.
A
B
H
7200/1 170 Plus
A
700
mm
B
700
mm
h
1300
mm
11
hANDLINg
Make sure that any lifting equipment is of adequate capacity to
lift and move the storage cylinder. Remove the brackets (1) to
free the storage cylinder.
To lift the storage cylinder, remove the plug (2) and insulation
(3) and screw an eyebolt (Ø 10 mm) of suitable capacity for the
weight of the cylinder into the hole (4).
1
1
1
2
4
3
If suitable equipment is not on hand to lift the storage cylinder
off the pallet using the eyebolt, proceed as follows.
− Place a platform of about half the height of the pallet
near the storage cylinder. Make sure the platform is able
to support the weight of the storage cylinder
− Remove the brackets (1) then carefully rotate and slide
the storage cylinder off the pallet on to the platform
− Make sure that the storage cylinder is perfectly stable,
and then remove the pallet
− carefully rotate and slide the storage cylinder off the
platform on to the floor
− Remove the platform. Position the storage cylinder as
required.
Adjust the feet to ensure that the storage cylinder is perfectly
level.
17
9
Wear suitable personal protective equipment and use
suitable safety devices.
0
Do not dispose of packaging material into the environment,
or leave it within the reach of children, since it can become
a potential hazard. Dispose of packaging material in
compliance with applicable legislation.
Installer
Summary of Contents for 7200/1 170 Plus
Page 15: ...15 END USER END USER ...
