10
3
Installazione
3.1
Rimozione viti di blocco dell’otturatore
Prima di montare il bruciatore sulla caldaia rimuovere le viti e i dadi 1)-
2)(Fig. 13). Sostituirli con le viti 3) M12x16 fornite a corredo.
3.2
Lunghezza boccaglio
La lunghezza del boccaglio va scelta secondo le indicazioni del costrut-
tore della caldaia e, in ogni caso, deve essere maggiore dello spessore
della porta della caldaia, completa di refrattario. Per le caldaie con giro dei
fumi anteriore 1), o con camera ad inversione di fiamma, eseguire una
protezione in materiale refrattario 5), tra refrattario caldaia 2) e imbuto
fiamma 4).
La protezione deve consentire al boccaglio di essere estratto. Per le
caldaie con il frontale raffreddato ad acqua non è necessario il rivesti-
mento refrattario 2)-5)(Fig. 14), se non vi è espressa richiesta del costrut-
tore della caldaia.
Il disegno a lato indica come effettuare l’applicazione del bruciatore ad una
caldaia dotata di frontone non raffreddato.
Si consiglia di non realizzare una sporgenza della testa superiore a 200 mm.
In ogni caso la parete in refrattario non deve estendersi oltre la fine della
testa di combustione del bruciatore.
3.3
Fissaggio del bruciatore alla caldaia
•
Predisporre un adeguato sistema di sollevamento aggan-
ciandosi agli anelli 3) Fig.14.
•
Infilare la protezione termica data a corredo sul boccaglio 4).
•
Infilare tutto il bruciatore sul foro caldaia, precedentemente
predisposto e fissare con le viti date a corredo.
La tenuta bruciatore-caldaia deve essere ermetica.
3.4
Accessibilità parte interna della testa
•
Togliere tensione.
•
Svitare il dado autobloccante 6) e sganciare il tirante 7).
•
Scollegare le prese X1 e X2 del servomotore.
•
Togliere le 4 viti di fissaggio 1).
•
Aprire il bruciatore sulla cerniera come in Fig. 15 (solo optional).
•
Sganciare i cavi e l’elettrodo 2).
•
Girare in senso antiorario la parte sottostante del gomito 3) fino
a svincolarla dalla sede.
•
Svitare la vite 4) con presa di pressione.
•
Estrarre la parte interna della testa 5).
•
Con bruciatore chiuso, si può accedere alla testa togliendo il
coperchio 8).
1
2
1
2
3
3
D12015
REFRATTARIO
500
MAX
363
/312
380
/350
D8401
Refrattario
Fig. 13
Fig. 14
20076245
20076247
Fig. 15
Summary of Contents for DB 6 SM CO1 A0
