16
2901898
GB
Long combustion head kit
2.1
Kit description
This manual provides instructions for preparing the burner to op-
erate with the control box.
The long combustion head kit is an accessory composed of:
2.2
Overall dimensions
Tab. A
2.3
Installation of the kit
To install the kit, proceed as follows:
Dismantle from the standard burner the blast tube 1), the dif-
fuser disc-electrodes unit 2), the high voltage cables 3) and
the nozzle 8) (Fig. 2).
On the nozzle holder 7) screw in the extension 5) and on this
the nozzle 8) (Fig. 3).
2
Long combustion head kit
Description
Quantity
Extension
1
Blast tube
1
High voltage cables
2
M4 X 12 screws (only for code 3000963)
1
Instruction
1
Kit Code
Type
A
3000963
363T1 - 364T1
163
3000982
362T1
181
WARNING
Always respect the measures indicated in Fig. 1.
Fig. 1
D6152
Ø 84
A
DANGER
Disconnect the electrical supply from the burner
by means of the main system switch.
Be careful as some drops of fuel may leak out dur-
ing this phase.
Fig. 2
D6153
8
1
2
3
363T1
Fig. 3
D6154
8
6
2
5
4
7
