20020956
2
GB
1.
BURNER DESCRIPTION
One stage gas burner.
1.1
BURNER EQUIPMENT
Flange with insulating gasket . . . . . No. 1
Screws and nuts for flange to be fixed to boiler . . . No. 4
Screw and nut for flange . . . . . . . . . No. 1
7 pin plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Remote reset connection . . . . . . . . No. 1
1.2
ACCESSORIES
MULTIBLOC ROTATION KIT
There is a special kit available that can be used to install the burner turned 180°, as illustrated on page 5 in
position 5 in the section entitled "
3.1 WORKING POSITION
". This kit is designed to ensure the gas train
valve works properly. The kit must be installed in conformity with laws and local regulations.
0
8
4
2
6
10
The burner meets protection level of IP X0D (IP 40), EN 60529.
According to directives: EMC 89/336/EEC - 2004/108/EC, Low Voltage 73/23/EEC - 2006/95/EC and
Machines 98/37/EEC.
Gas train according to EN 676.
The burner is approved for intermittent operation as per Directive EN 676.
1
– Air pressure switch
2
– 6 pole socket for gas train
3
– Control box
4
– Reset button with lock-out lamp
5
– Head holder assembly
6
– Pressure test point
7
– Flange with insulating gasket
8
– Air damper adjustment assembly
9
– Servomotor
10
– Motor
Fig. 1
D10158
8
6
1
4
2
5
10
3
7
9
Summary of Contents for RS5
Page 9: ...20020956 8 I Fig 7 CN1 T6A ...
Page 25: ...20020956 8 GB Fig 7 CN1 T6A ...
