Riello RX 2500 S/E, Installation, Use And Maintenance Instructions

20140257

4 

GB

Information and general instructions

1.1.4

Delivery of the system and the instruction 
manual

When the system is delivered, it is important that:



the instruction manual is delivered to the user by the system
manufacturer, with the recommendation to keep it in the room
where the heat generator is to be installed.



The instruction manual shows:
– the serial number of the burner;

– the  address  and  telephone  number  of  the  nearest  Assis-

tance Centre.



The system supplier must carefully inform the user about:
– the use of the system; 
– any further tests that may be required before activating the

system; 

– maintenance, and the need to have the system checked at

least once a year by a representative of the manufacturer or
another specialised technician.
To ensure a periodic check, the manufacturer recommends
the drawing up of a Maintenance Contract.

1.2

Guarantee and responsibility

The manufacturer guarantees its new products from the installation
date, in accordance with the regulations in force and/or the sales
contract. At the moment of the first start-up, check that the burner
is integral and complete.

In particular, the rights to the guarantee and the responsibility will
no longer be valid, in the event of damage to things or injury to peo-
ple, if such damage/injury was due to any of the following causes:



incorrect  installation,  start-up,  use  and  maintenance  of  the
burner;



improper, incorrect or unreasonable use of the burner;



intervention of unqualified personnel;



carrying out of unauthorised modifications on the equipment;



use of the burner with safety devices that are faulty, incorrectly
applied and/or not working;



installation  of  untested  supplementary  components  on  the
burner;



powering of the burner with unsuitable fuels;



faults in the fuel supply system;



use of the burner even following an error and/or an irregularity;



repairs and/or overhauls incorrectly carried out;



modification of the combustion chamber with inserts that pre-
vent  the  regular  development  of  the  structurally  established
flame;



insufficient  and  inappropriate  surveillance  and  care  of  those
burner components most likely to be subject to wear and tear;



the  use  of  non-original  components,  including  spare  parts,
kits, accessories and optional;



force majeure.

The manufacturer furthermore declines any and every respon-
sibility for the failure to observe the contents of this manual.

.........................................................................................

............................................................................................

............................................................................................

...................................................................................

WARNING

Failure  to  observe  the  information  given  in  this
manual, operating negligence, incorrect installation
and  carrying  out  of  non  authorised  modifications
will result in the annulment by the manufacturer of
the guarantee that it supplies with the burner.