5
Once the positioning instructions have been completed, in order to improve hold, it is recommended the
front wheels of the Socle Box be locked using the brakes located on them.
Brakes indicated in the picture.
To lock them in place tighten the screw on the
wheels.
L
OADING THE
UPS
Once all of the preceding steps have been correctly carried out, load the UPS on top of the Socle Box as
follows:
ATTENTION:
TO AVOID DAMAGE TO PERSONS AND/OR THE EQUIPMENT, CAREFULLY
OBSERVE THE FOLLOWING INSTRUCTIONS:
A MINIMUM OF TWO PEOPLE ARE REQUIRED TO LOAD THE UPS.
Centre the wheels of the UPS using the
slides and start pushing.
Ensure the wheels are properly inserted in the
tracks of the Socle Box and continue to push
Slow the stroke of the UPS to avoid
violently hitting the limit stop.
When the wheels are close to the limit stop,
brake the wheels of the UPS as indicated
above. Remove the pallet and slides.
Summary of Contents for Socle Box
Page 1: ......
Page 7: ...7 INSTALLATION DRAWING Cable entry Cable entry Cable entry Cable entry...
Page 8: ...0MNMSTSB12LIA...
