6
W
IRING THE
UPS
The Socle Box is equipped with different openings on its various sides and an inner holed bar to simplify
the wiring operations of the UPS.
A
–
Upper
fixed opening
for the passage of wires coming from the UPS.
B
–
Recloseable windows
on both sides. Designed to facilitate working inside the Socle Box and to
allow the passage of wires from the rear part if necessary.
C
–
Mobile lower window
for the passage of wires, equipped with adjustable closure, depending on
needs.
D
–
Holed bar
to allow tightening the wires which pass through the Socle Box using simple clamps. The
bar can be raised/lowered using the dedicated fastening holes on the sides, as shown in figure (see
d1
). Each of these holes can be used for grounding the Socle Box using a screw present on one of
the side bars (see
d1
).
F
INAL ASSEMBLY
Once the UPS wiring is complete and any windows not used by the Socle Box have been closed, proceed
with securing the UPS using the 2 side fixing brackets and the 8 galvanised M6x8 screws supplied.
Assemble the front bulkhead using the 8 black M4x8 screws supplied.
The structure thus obtained is stable as a whole and post-installation handling operations can be carried
out safely; but if environmental circumstances or supply requirements require the ups be fixed to the
ground, use the two L-shaped brackets supplied with the Socle Box to secure it to the ground.
Summary of Contents for Socle Box
Page 1: ......
Page 7: ...7 INSTALLATION DRAWING Cable entry Cable entry Cable entry Cable entry...
Page 8: ...0MNMSTSB12LIA...