59
(2) Preset
When an event occurs, the PTZ camera will be preset.
①
Select
{Alarm Out}
Æ
{PSet}
for the channel using the arrow keys and the Select
button.
②
On the selection window, select the event (sensor or sound) and decide whether to
generate an alarm or not using the arrow keys and the Select button.
③
Select
{Alarm Out}
Æ
{PSet}
Æ
{Preset Action}
for the channel using the arrow keys
and the Menu button.
④
Assign a Preset for each event.
⑤
Select the OK button to save. Otherwise, select the cancel button and press the
[SELECT]
button to cancel.
[Figure 5-4. Preset Action Setting Window]
To set all channels to the same value at the same time, go to the top of the
{Preset}
column
and press the
[Select]
button.
Preset can be set to 1 ~ 8.
(3) Email
When an alarm or an event occurs, emails will be sent to the specified email address.
①
Select
{Alarm Out}
Æ
{Mail}
for the channel using the arrow keys and the Select button.
②
On the selection window, select event types and decide whether to use the email
function or not using the arrow keys and the Select button.
The mail service can be set up in the
{Additional Setup}
{Network}
{Alarm}
menu.
(4) Spot
Displays the video on the TV monitor connected to the spot port on the rear side of the system
in case of an alarm or an event
