Easily Handling the Test Strip
31
30
How to easily handle the test strip ?
Inserting the test strip:
1. Hold the test strip between thumb and middle finger with indication symbol
" " facing up.
2. Put
on the side of strip as shown.
forefinger
NOTE
This is the easiest way to insert the strip.
3. Insert the test strip into test strip port until it snaps and firmly stops.
Removing the test strip:
1. Hold the test strip same as insert it.
2. Rotate the test strip counterclockwise and pull up at the same time.
NOTE
Pull the strip in counterclockwise direction will be easier to remove it from
the meter.
Easily Handling the Test Strip
3. Take the test strip out of test strip port totally.
Please follow the local regulation and discard used strip properly.
NOTE
Code key will not be contaminated by blood, if you follow the step correctly.