Performing a Blood Glucose Test
28
29
Performing a Blood Glucose Test
13
15
14b
12
14a
14c
12. A blood drop icon will appear on the display window and
will be accompanied by a beep (if volume is turned on).
Apply the blood sample within 2 minutes.
13. Place the lancing device against your fingertip and press
the release button.
14. Touch and hold the blood drop to the edge of sample
port until the view window is filled with blood. If the view
window is not completely filled with blood the test will
not start. If the blood sample was insufficient, discard
the test strip and repeat with a new RIGHTEST Blood
Glucose Test Strip.
15. Countdown Mode will begin on the display window. After
5 seconds, your test result will appear.
7. Hold the base in one hand and pull on the plunger with
the other hand. The device will be cocked. Release the
plunger and it will automatically move back to its original
position near the hub.
8. Wash your hands with warm soapy water and dry
thoroughly.
9. Take one RIGHTEST Blood Glucose Test Strip from the
vial. Close the vial cap immediately.
10. Insert the strip into the test strip port of the RIGHTEST
Blood Glucose Meter with the view window facing up.
11. Once the strip is inserted, all symbols will appear on your
meter display and will be accompanied by a beep (if
volume is turned on).
7
8
NOTE
- RIGHTEST Blood Glucose Meter will automatically
detect the Code number on the strip. You do not have
to check the Code number on the meter display and
strip vial.
11
10
9
Summary of Contents for GT200
Page 2: ......