30
Performing a Blood Glucose Test
Performing a Blood Glucose Test
31
16. Pull off the depth adjustable cap. Without touching the
used disposable lancet, insert the lancet tip into the
protective lancet cover.
17. Hold the release button in one hand (see picture 17, step
1) and pull on the plunger with the other hand (see
picture 17, step 2) to safely eject the used disposable
lancet.
18. Discard the used disposable lancet into an appropriate
puncture-proof or biohazard container.
19. Replace the depth adjustable cap after finishing the test.
18
16
17
19
CAUTION
- Do not apply your blood drop to the sample port on the strip until you see the " " appear.
The screen will display " " and " " if you apply blood too soon. If this occurs, please
use a new test strip to test.
- Record the opening date of a new test strip vial. Discard the vial of test
strips 12 months after opening.
- Always keep the metal contacts of the test strip port clean. If any
dust or impurities are present, please clean with a small, soft brush.
- All parts of this kit are considered biohazards and can potentially transmit
infectious diseases, even after you have performed the cleaning and disinfecting procedure.
- Users should wash hands thoroughly with soap and water after handling the meter, lancing
device, and test strips.
- Please refer to the section "Maintain the Products" for more cleaning information.
1
2
Summary of Contents for GT200
Page 2: ......
