44
45
Recalling Average Test Results
Recalling Average Test Results
1. Press the Main button to switch the screen to Average Mode.
2. On the average screen, use either the Left or Right button to view 1-day, 7-days, 14-days, 30-
days, 60-days or 90-days averages.
3. The number shown in the lower right hand corner indicates how many test results have been
calculated.
4. Excluding test results from the average calculation:
Mark "exclusion": After the your in-time testing result pop out, Press the Right or Left button until
the symbol "NO AVG" appears in the upper Left of the screen. The test result is now excluded
from averaging.
RIGHTEST Blood Glucose meter provides several average test results. View the 1-day, 7-days,
14-days, 30-days, 60-days and 90-days average test results for better blood glucose
monitoring.
Cancel "exclusion": Stay in the display of "NO AVG". Press the Right or Left button until the
symbol "NO AVG" changes to "AVG". Keep pressing the Right or Left button and while
simultaneously pressing the Main button until "AVG" appears. The test result is now included
into the average calculation.
5. Quick Searching:
To view test results in sequential order automatically, enter the Memory Mode. Press the Right or
Left button for 2 seconds. (The Right button is for viewing from the most current to the oldest
test results. The Left button is for viewing from the oldest to the most current test results).
Release the button to stop at any particular test result.
NOTE
- The Average function requires that the correct time and date is set
.
Test results must exist
during the desired time interval. For example: To get a 14-day average on 1/30/11, you
must have test results dated between 1/17 and 1/30. If no test results exist during that time
frame you will not receive an average.
- To exclude test results from average calculation, you need to remain in Test Mode and
perform the exclusion right after you get the test result.
- The "Lo", "Hi" results, control solution test results and test results at abnormal temperatures
< 6°C (43°F) and > 44°C (111°F) will be excluded from average calculations.
PRECAUTION
- Set the time and date to activate the average function.
Summary of Contents for GT200
Page 2: ......
