44
Set Up Your RIGHTEST CGMs
Follow these steps to apply your Senso
1. Choose an insertion site on the
upper arm.
2. Wipe the insertion site with an alcohol wipe and wait approximately for 2 minutes until the site
dried out thoroughly before getting started.
3. Take out the sensor inserter from its package. Open the sensor inserter cap.
4. Place the inserter over the site and push down firmly to insert the sensor. Stay for 10 seconds to
ensure the adhesive patch is fully attached to your skin.
NOTE :
Use a different site for the next sensor insertion.
NOTE :
Do not apply the inserter if the base falls out when opening the cap. Use a new one.
Do not apply the inserter if it is misused before the insertion. Use a new one.
Apply the inserter immediately after opening its package and cap.
Do not push down the inserter until it is placed over the insertion site.
2
3
4
5. Gently move the inserter away from your insertion site.
6. Make sure the sensor is securely attached to your skin.
7. Discard the inserter and its package according to local regulations.
6
45
Set Up Your RIGHTEST CGMs
Summary of Contents for HM312
Page 2: ......
