Manuale CT Jolly e Poker (Cod.CARTTURBINA062014) pag.6
Dear Customer,
Thank you for choosing this product. As a point of reference in the sector of manufacturing equipment and systems for painting surfaces, our
company is a guarantee of great reliability, quality and safety. All products are designed and manufactured to always guarant ee the best
performance levels. Convinced that we can contribute to improve the quality of work and to fulfil all safety needs, the equipment is provided with the
CERTIFICATION of CONFORMITY with the European directives.
The Management RIGO s.r.l.
1- LETTER FOR INFORMATION PURPOSES AND USE OF THE MANUAL .
This operation and maintenance manual is an integral part of the equipment and the user is obliged to know the content thereof. Without prejudice
to the essential features of the type of equipment described, our company reserves the right to make any change to any part, detail and accessory it
may deem to be adequate to improve the equipment at any time and without undertaking to promptly update this publication.
ALL RIGHTS ARE RESERVED, it is forbidden to reproduce any part of this manual in any form, without any explicit consent in writing.
2- SYMBOLS IN USE .
It represents operations that may involve some risks if not properly carried out.
3 -
PACKAGE AND STORAGE .
The equipment is packed in a cardboard box containing all necessary components and spare parts. Storage shall occur in environments at
temperatures between -15° and +40° and with a relative humidity not above 50%.
4 - CHECK THE PRODUCT YOU HAVE PURCHASED .
The original configuration of the painting equipment must absolutely not be modified.
Original accessories and spare parts guarantee the observance of safety rules.
Upon receipt, make sure that:
- The package is intact and not damaged.
- It contains all the documentation necessary for the proper installation and utilisation of the equipment.
In case of damage, inform the retailer immediately.
The Cart Turbine system (Jolly or Poker HVLP) includes the following standard supply:
1 CR9K or CR18K complete chassis
1 7m. (Ø8mm) hose for water-based varnish/enamel and 1 7m. (Ø13mm) water paint hose
1 TMR180E turbine complete with remote control and spare filters (CT-9 and CT18 only)
1 spray gun mod. ACT specific
1 9 or 18 litre stainless steel complete tank
1 user manual, Certificate of Conformity and Guarantee.
1 user manual, Certificate of Conformity and Guarantee of the TMR180E turbine (for CT-9 and CT-18 only).
1 spray gun manual for turbines. Certificate of Conformity and Guarantee
5 - CART ONLY DESCRIPTION: CR9K AND CR18K .
The cart consists of a compressor on which to mount a 9 or 18 litre tank, 2 product hose 7metre long and a specific ACT spray gun. The cart is
used in combination with Rigo turbines only.
It is recommended to use it with turbines of the E series. It may also be used with TMR 80 and 140. Not recommended with TMR55
6 - DESCRIPTION OF A COMPLETE Cart Turbine: CT-9 and CT-18 .
The cart also includes the TMR180E turbine to obtain a complete HVLP painting system.
The system has been specifically conceived for spraying varnishes/enamels and paints/water paints on large surfaces without any work interruption
thanks to the 9 or 18 Lt tank capacity.
The air and product hoses that are 7 mt in length, enable the operator to manage the work well and to move freely.
The minimum overall dimensions and the reduced weight help the operator handle it easily. The foldable chassis guarantees storage in small
spaces (page 2, figure
A
). The ergonomic design makes it easily transportable on ladders (page 2, figure
B
).
The system features provide for maximum practicality and professionalism and help the operator carry out his/her work. The dispensed product is
better nebulised and enveloped in an air jet, thus gently settling on the medium to be painted with the utmost precision. This will help the operator to
avoid or limit the overspray effect, thus reducing the dispersion of sprayed materials in the air compared to traditional systems and increasing the
yield up to 80-
85%, in favour of the operator’s health and the healthiness of the environment.
For operation and maintenance please comply with the turbine manual included in the package.
7 - DESCRIPTION OF an ACT spray gun .
The spray gun specifically realised for the JOLLY and POKER (CT-9 and CT-18) Cart Turbine system enables the operator to apply different types
of coverage on different media (metal, wood, masonry ...). The complete system provides for a smooth and uniform surface. For operation and
maintenance comply with the current manual and with the one for spray guns included in the package.
8 - IMAGE FOR DESCRIPTION OF a Cart Turbine: CT-9 and CT-18, ACT spray gun (see page 2) .
9 - TECHNICAL FEATURES .
10 - RATING DATA .
The equipment is provided with the manufacturers’ identification rating plate (6) and the EC-mark on one side of the chassis close to the pressure
gauge. The rating plate must not be removed.
CR9K
●
CR18K
CR9K
●
CR18K
Voltage 220/240V
– 50/60 Hz
Max absorbed power 200W
Max tank pressure 3.9 BARS
Tank capacity 9-18 lt
CR9K total weight 21.8 kg + package
CR18K total weight 23.3 kg + package
CT-9
●
CT-18
Voltage 220/240V
– 50/60 Hz
Max absorbed power with TMR180E 2000W
Max tank pressure 3.9 BARS
Tank capacity 9-18 lt
CT9 total weight 28.5 kg + package
CT18 total weight 30 kg + package
TMR180E weight 5.1 kg
!
!
!
