RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DM3000 Series
2-86
the interval time you will set, and the unit is s. When the project cycle number is
greater than 1, the command sets the interval time between the close project cycles.
5.
:scan:run
Syntax:
:scan:run
Function:
The command circulates the current project one time.
6.
:scan:run:cycle
Syntax:
:scan:run:cycle
□
<value>
Function:
The command sets the project cycle number, and runs the current project.
Explanations:
:scan:run:cycle
□
<value>
sets the project cycle number, and runs the current project.
The value is the cycle number.
7.
:scan:stop
Syntax:
:scan:stop
Function:
The command forces to stop the scan task in operating.
8.
:scan:list:task
Syntax:
:scan:list:task
□
<value>
Function:
The command lists all the task of the setting project.
