background image

|

29

EN

28

12. CLEANING AND MAINTENANCE

Basic information

Note

Your stove must be switched off and cooled before any maintenance work is 

performed. Ensure that you do not vacuum into the combustion air line during 

heating operation during any cleaning (vacuuming). You could vacuum out 

embers – FIRE RISK!

Note

SERVICE appears in the display after consumption of 700 kg pellets. Cleaning 

and maintenance is to be performed.

This message can be acknowledged by pressing ENTER and operation can 

be continued. The number of SERVICE messages is stored in the background.

Note

Only work on the unit when the mains plug has been disconnected.

The frequency with which the stove requires cleaning and the maintenance 

intervals depend on the fuel you use. High moisture content, ash, dust and chips 

may more than double the maintenance required. We would like to again point 

out that only tested and recommended pellets or logs may be used as fuel.

Tip

wood as fertiliser - The mineral content of the wood remains in the combustion 

chamber as ash as a residue of the combustion. This is an excellent fertiliser 

for all plants in the garden; it is a completely natural product. The ash should 

be stored first and extinguished with water.

Note

Ash may contain embers – only place ash in sheet steel containers.

Open the combustion chamber door

To open or close the combustion chamber door use the included key. This key 

can also be stored on the back of the stove.

Cleaning the fire trough

Despite the automatic ash dumping prior to and during heating operation, 

care should be taken that the air intake openings are not blocked with ash or 

clinker. Remove the clinker using the wire brush supplied and vacuum out the 

fire trough.

Note

Clean the fire trough regularly. Only clean when cold, when embers are 

extinguished!

Ampty the ash drawer

Empty the ash drawer regularly. The ash drawer is simply pulled forward with 

the combustion chamber door open

Summary of Contents for Memo





































Reviews: