3.2 Adjusting the Time (SET DATE / TIME)
Initial position of the cursor is on YEAR. Choose by
▼▲
keys and fix the setting by
the ENTER key. The cursor then moves to DAY. Set DAY, YEAR, HOUR and MINUTE
by the same procedures as MONTH. HOUR is displayed by 24 hour clock.
3.3 Confirming the Saved Data (VIEW SAVED DATA)
On the 1st line, the data number is shown. On the 2nd to 3rd line, the saved date/ time are displayed.
Select the date number by [
▼▲
] key and fix the selection by [ENTER] key. The saved data then comes up. (At
displaying the saved data, the measuring gas and the base gas is displayed with white letters on black background.)
(CANCEL key leads to the initial display in Setting Mode.)
3.4 Clearing the Saved Data (CLEAR SAVED DATA)
Select the “CLEAR SAVED DATA” by
▼▲
key and fix the selection by
ENTER key. If you want to cancel the action, select “CANCEL” and
press the [ENTER] key.
3.5 Start the Measurement
（
START MEAS.
）
If you want to start the measurement right after setting each item,
select “START MEAS” by
▼▲
key and press [ENTER] key. The display
will then go to the Measuring Mode.
