8 Storage, Relocation and Disposal
8-1. Procedures to store the detector head or leave it for a long time
GD-D58 Series
- 40 -
8
Storage, Relocation and
Disposal
8-1. Procedures to store the detector head or leave it
for a long time
The detector must be stored under the following environmental conditions.
In a dark place under the normal temperature and humidity away from direct sunlight
In a place where gases, solvents or vapors are not present
8-2. Procedures to relocate the detector head or use
it again
When the detector head is relocated, select a new place in accordance with "4-2. Precautions for installation
points" and "4-4. How to install".
For information on wiring, see "4-5. How to wire". The unpowered time must be minimized when the
detector head is relocated.
8-3. Disposal of products
When the detector head is disposed of, it must be treated properly as an industrial waste in accordance
with the local regulations.
CAUTION
When using a relocated or stopped/stored detector head again, do not forget to perform a gas
calibration. For information on readjustment including a gas calibration, please contact RIKEN
KEIKI.
