15
７．STORAGE, RELOCATION AND DISPOSAL
７－１．Procedures to store the detector head or leave it for a long time
The detector head must be stored under the following environmental conditions.
• In a dark place under the normal temperature and humidity away from direct sunlight
• In a place where gases, solvents or vapors are not present
７－２．Procedures to relocate the detector head or use it again
When the detector head is relocated, select a new place in accordance with “4-2. Installation place” and
“4-4. Installation works”.
For information on wiring work, see “4-5. Caution at wiring construction”. The unpowered time must be
minimized when the detector head is relocated.
７－３．Disposal of products
When the detector head is disposed of, it must be treated properly as an industrial waste in accordance
with the local regulations.
・ When using a relocated or stopped/stored detector head again, never fail to perform a calibration. For
information on readjustment including a calibration, please contact RIKEN KEIKI.
CAUTION
！
