7. Maintenance
7-2. Regular maintenance mode
- 61 -
▲
↓↑
▼
Default Gateway
Setting
Change the value by
pressing the
▲
or
▼
key, and then press
the SET key to
confirm the value.
There are default
gateways from DEF1
to DEF4. Select one
using
▲
and
▼
keys
and set them one by
one in the same way.
●
○
○
○
0
DEF 1
MAINTENANCE
⇔
SET
255
DEF 1
MAINTENANCE
▲
↓↑
▼
(DEF2 - DEF4)
｜↑
▲
｜｜
▼
↓｜
DHCP Setting
Select either ON/OFF,
and then press the
SET key to confirm
the selection.
When ON is selected,
an IP address is
automatically
obtained from the
DHCP server. In this
case, the IP1 to IP4,
SUB1 to SUB4, and
DEF1 to DEF4
settings are disabled.
●
○
○
○
OFF
DHCP
MAINTENANCE
⇔
SET
OFF
DHCP
MAINTENANCE
｜↑
｜｜
▲
｜｜
▼
｜｜
↓｜
▲↓↑▼
ON
DHCP
MAINTENANCE
Setting result record
To record the results
of the settings made
in the above, press
the SET key.
●
○
○
○
SAVE
MAINTENANCE
→
SET
SPAN Y/N
MAINTENANCE
▲
↓↑
▼
↓
Return
to
MAC Address Check
Press the SET key to
record the setting
results and return to
SET 18. ETHERNET
* In ETHERNET mode, it is necessary to record setting results after all the settings have been selected.
Press the MODE key before completion to undo all the changes that have been made.
NOTE
It takes 10 seconds or more for the address settings to be recorded and for the settings to take effect on the
system. (Particularly for DHCP, the time it takes depends on the environment.) While the settings are putting
into effect, "0" is displayed for all of MAC1 - 6, IP1 - 4, SUB1 - 4 and DEF1 - 4, and none of the Ethernet
functions is available.
